water in a double-stage CO2 cycle.
For these processes, efficiencies above 50 % can be expected and could possibly lead to a major decrease of hydrogen production costs. The main technical issues for these high-temperature processes relate to materials development for corrosion resistance at high temperatures, high-temperature
membrane and separation processes, heat exchangers, and heat stora
1. Introduction
1) Definition of preservation and food-spoilage micro-organisms
Food preservation is the process of treating and handling food to stop or greatly slow down spoilage (loss of quality, edibility or nutritive value) caused or accelerated by micro-organisms. Some methods, however, use benign bacteria, yeasts or fungi to add specific qualities and to preserve food (e.g., cheese, wine
Ⅰ. 가공기술과 소성가공기술
재료에 어느 한계의 외력을 가하여 변형한 후 외력을 제거하면 원형으로 돌아간다. 이때 원형으로 돌아가는 성질을 탄성(彈性 ; elasticity), 그 변형을 탄성변형(彈性變形 ; elastic deformation)이라 하며, 그 물체를 탄성체(彈性體 ; elastic body)라 한다. 외력을 어느 정도 이상으
water, those free complex carbohydrates turned into fermentable sources through pre-treatment process - saccharification. Then, it can be changed ethanol form through fermentation by yeast or genetically engineered E.coli and we can produce biofuel from that ethanol. Now, the way of decreasing process and cost are studied from a few researchers. So we will show the whole process of the production
모든 물질은 순환한다는 점에 착안
Recycling을 함으로써 자연에서 생선된 물질을 다시 자연으로 돌려보내며 생태계의 평행을 유지하고 뿐만 아니라 더욱 비옥한 땅을 얻는 효과도 거둘 수 있다.
Selecting an Outdoor Compost Bin
Composting in a Small Outdoor Space
Rodent Proofing
Materials to Compost
Complete L
Distinguished by glass transition point Tg
Glass-like hard phase -> Robber-like soft phase
Distinguished by melting point Tm
Highly tangled polymer chain – Semi crystalline
Cooling tower location
Hazardous area
Cooling tower fog control
Winter operation
Cooling water 화학적 처리 목적
냉각 표면의 SCALE 방지
Cooling water와 접촉되는 금속의 부식 방지
냉각 탑 자체와 냉각표면의 FOULING 방지
COOLING TOWER TIMBER
resistance)
표면저항은 보통 단위 Ω/□로 표시된다. 일반적인 선 저항은 두 개의 probe로 임의의 거리에 대한 저항을 측정하지만, 표면저항의 경우에는 동일한 간격의 4개의 탐침으로 측정하게 된다. 이때 쓰이는 Probe가 Four point probe이고, 보통 탐침은 1mm간격으로 일렬 구성된 probe를 사용하며, 4개의 탐침으
water and recycled activated sludge are introduced typically at several points in the aeration tank. The organic load on the aeration tank, MLSS concentration, and oxygen demand are uniform throughout the tank. An advantage of the CMAS process is the dilution of shock loads that occur in the treatment of industrial wastewaters. The CMAS process is relatively simple to operate but tends to have lo
Introduction
Fossil fuels
- Main Energy Source
- Causing global warming
- Being exhausted
→ need
alternative energy
Hydrogen is one of well-known clean energy source.
Several technologies are already available in the marketplace for the industrial production of hydrogen.
Hydrogen can be produced from a variety of feedstocks.
A variety of process technologi